Basic information

Main applications

Application 1: Polytetrahydrofuran is mainly used as the soft segment of block polyurethane or block polyether polyester. Block polyurethane rubber made of polytetrahydrofuran with an average molecular weight of 1000 can be used as tires, transmission belts, gaskets, etc.;

Application 2: It can also be used for coatings, artificial leather, films, etc. The obtained block polyether polyester is a thermoplastic elastomer. Polytetrahydrofuran with an average molecular weight of 2000 can be used to make polyurethane elastic fibers.

Application 3: It was reported that block polyurethane made of polytetrahydrofuran has good anticoagulant properties and can be used as a medical polymer material. 

Packaging, storage and transportation

It should be stored in completely closed tanks or other containers sealed with dry nitrogen. Tanks must be equipped with external or internal heating to maintain a temperature of approximately 50°C. The solidified PTMEG can be heated at about 70°C for 24 hours to fully melt it, but it should not be stored at 90°C for a long time.

Store in a cool, dry and well-ventilated place, away from fire, sparks and open flames. Because PTMEG is hygroscopic and prone to oxidation, it is important to avoid exposure to moisture and air. To prevent static electricity, the shipping container should be grounded. Gloves and protective glasses should be worn during loading and unloading to avoid contact with eyes and skin; soap and water should be used to wash after finishing the work.

Fire fighting measures

In case of fire, extinguish with water spray, alcohol foam, dry chemical or carbon dioxide fire extinguisher.